Name:         6360/64xx/54xx Update
Version:      1.0
Released:     November 19, 1996
Description:  Corrects problems that may occur with external
SCSI devices and adds support for additional Ethernet
network protocols. This update is designed for use with
Macintosh Performa 6360, 64xx series Macintosh computers,
such as the Macintosh Performa 6400 and the Power Macintosh
6400, and 54xx series Macintosh computers, such as the
Macintosh Performa 5400 and Power Macintosh 5400.

This software consists of a self-extracting archive of a
Disk Copy 1440K disk image.  To use, download, double-click
the downloaded file (this decompresses it), and use Disk
Copy to create a disk.

From the Read Me included with this software:

Important Information
About the 6360/64xx/54xx Update

The 6360/64xx/54xx Update corrects problems that may occur
with external SCSI devices and adds support for additional
Ethernet network protocols. The Update is designed for use
with the following Power Macintosh and Performa models:

* Macintosh Performa 6360
* 64xx series Macintosh computers, such as the Macintosh
  Performa 6400 and the Power Macintosh 6400
* 54xx series Macintosh computers, such as the Macintosh
  Performa 5400 and Power Macintosh 5400

Fixes and Features Provided by this Update

The 6360/64xx/54xx Update provides the following corrections
and features for 6360, 64xx series, and 54xx series
Macintosh computers:

* Fixes problems with using some external SCSI devices, such
as external hard disks, scanners, or removable storage
devices.

* Fixes problems with printing to a Personal LaserWriter SC
or LaserWriter II SC printer. Apple recommends using
QuickDraw GX and the LaserWriter II SC GX printer driver
with LaserWriter SC printers because there are known
problems with the non-GX LaserWriter SC printer driver. You
can install QuickDraw GX from the system software CD-ROM
disc that came with your computer or download the software
from the Apple Software Update sites on the Internet via
<http://www.info.apple.com/swupdates/>, America Online, or
CompuServe.

* Adds support for additional Ethernet network protocols. If
your computer uses the optional Ethernet CS II card to
provide Ethernet networking, the 6360/64xx/54xx Update
installs files that provide support for the MacIPX and Local
Area Transport (LAT) network protocols.

Installing the 6360/64xx/54xx Update

To install the 6360/64xx/54xx Update, do the following:

1. Start up your computer.

If one or more external SCSI devices are preventing your
computer from starting up properly, turn them off before
starting up. If your computer still does not start up, turn
off your computer and SCSI devices. Then disconnect the SCSI
devices and try starting up your computer again.

2. Double-click the Installer icon.

3. Click the Switch Disk button until your hard disk appears
in the Destination Disk window.

4. Click the Install button.

5. Click the Restart button after installation was successful.

6. Shut down the computer and reconnect the external SCSI
devices that you may have disconnected in step 1. Then start
up your computer again.

If you are having problems starting up your computer with
external SCSI devices attached, refer to the information on
connecting external SCSI devices in your Macintosh user's
manual, or contact the manufacturer of your external SCSI
device.

Note:  If you later reinitialize your internal hard disk
with Drive Setup 1.1 or earlier, the fixes installed by the
6360/64xx/54xx Update will be removed, and you will need to
install it again. (Most likely you will never need to
reinitialize your hard disk, which was set up properly at
the factory. Before you reinitialize your hard disk, see the
troubleshooting information in your Macintosh user's manual
for more information.)


What is installed by the 6360/64xx/54xx Update?

SCSI updates The 6360/64xx/54xx Update installer installs a
patch to a partition on your internal hard drive and
installs updated resources into your System file in the
System Folder. None of the SCSI Update files are visible
after installation. To confirm whether or not the update is
installed, you should check that the new files listed below
are in your Extensions folder.

Ethernet updates The 6360/64xx/54xx Update installer
installs the files "PCI Network Legacy Layer" and "PCI
Network Legacy Loader" into your Extensions folder in your
System Folder.

Copyright 1996 Apple Computer, Inc. All rights reserved.
Apple, the Apple logo, LaserWriter, Macintosh, Performa, and
Power Macintosh are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries. QuickDraw GX is
a trademark of Apple Computer, Inc. 11/12/96
